HFRR (High Frequency Reciprocating Rig)
/ Accessories
HFRR Mini Printer (HFRMP)
Description
An alternative to the PC option, the HFRR mini printer provides an uniquely identified hardcopy report of test results. The thermal mini printer is connected directly to the HFRR control unit by utilizing the same serial port on the HFRR control unit as the PC and can be easily configured within minutes of connection.
Supplied components
- HFRR Mini Printer
- Communications lead
- 100-240VAC power supply
- Spare thermal paper roll
An example test print-out is shown below.
Example test print-out
Installation
The mini printer will be automatically configured when it is connected to the PC socket of the HFRR control unit.
Control unit - Mini Printer Connection
To test that it is working correctly, connect the mini printer to the HFRR and switch on the power to the mini printer. Select PRINTER from the SETUP3 screen.
The screen should look like the one below, confirming that the printer has been correctly detected and configured.
Press TEST to run a standard communications test with the mini printer. The printer will print a short test page.
To print test reports, either press PRINT when given the choice at the end of a test, or look up past tests in the 'HISTORY' menu and press PRINT in the 'DETAIL3' screen.
Indicator Descriptions
On the front of the printer there is an LED indictor which changes colour depending on the state of the printer. If the LED is green, everything is working fine. If the LED is orange, the paper is low and will need to be replaced soon.
PCS Instruments, 78 Stanley Gardens, London W3 7SZ, UK: Tribology Test Equipment: Traction Machines: Testing Fuels
Tel: +44 (0)20 8600 9920 
Fax: +44 (0)20 8600 9921 
Email: