+44 (0)20 8600 9920
+44 (0)20 8600 9921
PCS Instruments
/ Products
ABS (Automated BOCLE System)
The ABS - automatic instrument to perform the ASTM D5001 test method for "Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator".
ABSSL (Automated BOCLE System Scuffing Load)
The ABSSL - automatic instrument that conforms to the requirements of ASTM D-6078 "Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)".
EHL (Elasto Hydrodynamic Lubrication)
The EHL Ultra Thin Film Measurement System is a computer controlled instrument for measuring the film thickness and traction coefficient (friction coefficient) of lubricants in the elastohydrodynamic lubricating regime.
HFRR (High Frequency Reciprocating Rig)
The HFRR is a microprocessor-controlled reciprocating friction and wear test system which provides a fast, repeatable assessment of the performance of fuels and lubricants.
-
USV (Ultra Shear Viscometer)
The USV (Ultra High Viscometer), a computer controlled instrument capable of fully automatic viscosity measurements at 10 million reciprocal seconds.
MPR (Micro Pitting Rig)
The automated micropitting test rig uses the proven three point contact configuration. This allows a large number of cycles in a short period of time, greatly reducing testing time.
-
MTM (Mini Traction Machine)
The MTM2 is a flexible general purpose instrument for measuring the frictional properties of lubricated and unlubricated contacts under a wide range of rolling and sliding conditions.
JBM (Journal Bearing Machine)
The JBM is a computer controlled journal bearing test machine for the measurement of bearing friction over a wide range of operating conditions.
